Everon® 6200 DAS Technology | Enterprise DAS Cellular System | Corning

NOTE: Everon 6200 and Everon 6200 with C-band headend components and remote units are not interchangeable. For assistance on which version supports the needs of your project, pleasecontact us below.

Access Unit (A3)

The Access Unit connects each mobile operator’s base station to the Distributed Antenna System’s signal distribution. The AU supports multi-operator and multiple technologies. One AU is required per sector and uses 3.50 inches or two RU of rack space per unit. Available for 48 VDC or 120-200 VAC power sources.

AU Cellular Details

• Supported modulation types are 3G, 4G (LTE), and 5G (5G-NR)
• Support SISO and MIMO Configurations
• Digital fronthaul network for DAS remotes uses Common Public Radio Interface (CPRI)

Expansion Unit (E3)

The Expansion Unit (EU) distributes multi-operator digital signal traffic to all attached remotes. As a neutral host interconnect it routes the Access Unit (AU) CPRI traffic to/from all remotes. Up to 5 EUs can be cascaded to an AU port to support large sector designs. Each EU is 1.75 inches or one RU of rack space. Available for 48 VDC or 120-200 VAC power sources.

EU Cellular Details

• Distributes downlink cell signals from AU CPRI stream and routes to remotes
• Collects uplink cell signals from remote CPRI streams, combines and routes to the AU
• EU is operator agnostic
• EU is independent of individual Mobile Devices

N3 Low-Power Remote

The E-62-N3RU is a low-power remote unit supporting cellular technologies on fiber optic cable using the CPRI protocol. The N3 is ideal for multi-operator, multi-band, static capacity distribution deployments of cellular services in small-to-medium coverage areas. The N3 supports up to eight frequency bands. The N3 converts an optical signal to RF and then transmits at the relevant 3GPP band and receives the analog RF signal, conditions it, and converts it back to optical for distribution to the Expansion Unit (EU3) or Access Unit (A3).

NOTE: Everon 6200 (AU2, EU2, N2, M2 & H2) and Everon 6200 with C-band (AU3, EU3, N3) headend components and remote units are not interchangeable. For assistance on which version supports the needs of your project, pleasecontact us below.

Access Unit (AU2)

The Access Unit (AU2) connects each mobile operator’s base station to the Distributed Antenna System’s signal distribution. The AU2 supports multi-operator and multiple technologies. One RU (1.75 inches) of rack space per required AU. Available for 48 VDC or 100-240 VAC power sources.

AU Cellular Details

• Supported modulation types are 3G, 4G (LTE), and 5G (5G-NR)
• Support SISO and MIMO Configurations
• Digital fronthaul network for DAS remotes uses Common Public Radio Interface (CPRI)

Expansion Unit (EU2)

As a neutral host interconnect, the Expansion Unit (EU2) routes the Access Unit (AU) CPRI traffic to/from all remotes (N2RU, M2RU and H2RU). Up to 5 Expansion Units can be cascaded to an Access Unit port to support large sector designs. Each Expansion Unit is 1.75 inches or one RU of rack space. Available for 48 VDC or 100-240 VAC power sources.

EU Cellular Details

• Distributes downlink cell signals from AU CPRI stream and routes to remotes
• Collects uplink cell signals from remote CPRI streams, combines and routes to the AU
• EU is operator agnostic
• EU is unaware of individual Mobile Devices